Auerswald COMfortel 1500, User Manual

Page: 56 / 236

Make a Call
Dialling a Telephone Number
56
Dial a Number with a Direct Exchange Line Telephone
If your telephone is configured as a direct exchange line telephone (with the configuration
programme COMset), you will hear the external dial tone right after picking up the receiver.
In order to call an external connection, you have to dial the external telephone number with-
out the exchange line access number “0”.
In order to call the other kinds of call (internal, short-code dialling numbers and so on.), you
have to start an internal call first after picking up the receiver.
If you like to use the dial preparation or e.g. like to make an entry for the telephone book or
destination speed dial key, you have to press the star key twice first for these call types
8
:
Internal call, Short-code Dialling, private exchange line access, programming of the PBX, etc.
An external number has to be entered without exchange line access number “0”.
8
Only valid for internal dialling and speed dialling if operated on the PBX systems COMpact 5010 VoIP,
COMpact 5020 VoIP, COMmander Basic.2 and COMmander Business (see manual of the PBX).
A
Pick up the receiver.
or
Press the hook key to start handsfree opera-
tion (see also
page 38 ).
You are hearing the external
dial tone.
internal
Press the softkey to start internal call.
You are hearing the internal
dial tone.
N
internal number
Dial a telephone number.
If you finish dialling the tele-
phone number, the subscriber
will be called.
[ ]