Auerswald COMfort DECT 800, Installation And Configuration Manual, Page: 16 / 36

16
Assign internal Telephone Numbers to the Handsets
The internal telephone numbers are assigned to the individual handsets with the configuration pro-
gram COMset of the PBX. For this purpose the base station has to be connected to the internal S
0
bus of the PBX.
햲
Open the configuration program and read out the existing configuration of the PBX (File ... Open
... PBX).
햳
On the page „Internal telephone numbers ... Subscriber“ ( pic. 5 on page 17 ) you have to enter
as many new telephone numbers as there are handsets. Select for these telephone numbers
under „Kind of device“ the device „COMfort DECT“. Select the internal S
0
port (and the mod-
ule) connected to the corresponding base station.
☞
Pay attention to the fact that a maximum of one base station and 8 handsets - that are 8 internal
telephone numbers- are possible on one internal S
0
port (within one call distribution for one external
telephone number a maximum of 3 handsets can be called).
햴
Now open the page „Internal telephone numbers ... Scr -> COMfort DECT“ ( pic. 5 on
page 17 ). Depending on how many S
0
ports you have configured telephone numbers for hand-
sets, one or more base stations with assigned telephone numbers are displayed.
To assign a telephone number to a handset, select or enter the serial number of the handset in
the column „Serial number of the mobile handset“ in the corresponding line now. Each serial
number has to be assigned to one telephone number only. If you have already subscribed the
handsets to the base station (see
chapter Login of the Handset to the Base Station on page 13 ),
you can browse through the list of serial numbers of these handset by double clicking and one
click on the downwards arrow and select a serial number by mouse click then.