manualshive.com logo in svg

auer dFT3, Operating Manual

Share
Download
auer dFT3 Operating Manual Download Page 26

26                                                                                                                           dFT3 1.1

Set dialling mode

- 

Lift the handset.

- 

Press the * and # keys simultaneously.

- 

Press key 9.

- 

Enter the code for the desired dialling mode.

- 

Press the       key to store the selected dialling mode.

- 

Replace the handset.

Code / Key

Dialling mode

Comment

1

Dual-tone multifrequency (DTMF),
unlimited tone duration

The DTMF tone is being generated as
long as the associated key is being
pressed.

2

Dual-tone multifrequency (DTMF),
tone duration 90 ms

As-delivered condition

3

Pulse dialling (PD), 1.5:1

4

Pulse dialling (PD), 2:1

                                           (1, 2, 3, 4)

Enter the exchange code

- 

Lift the handset.

- 

Press the * and # keys simultaneously.

- 

Press key 0.

- 

Enter the exchange code (a digit or the R key;* and # not allowed)

- 

Press the       key to store the entered exchange code.

- 

Replace the handset.

                                                   (0…9, R)

Delete the exchange code

- 

Lift the handset.

- 

Press the * and # keys simultaneously.

- 

Press key 0.

- 

Press the # key.

- 

Press the       key to delete.

- 

Replace the handset.

Summary of Contents for dFT3



































Reviews:

No comments

Brands by name

Popular brands

Load more brands