10
Recovery factory set:
Press the "confirmation" button, it will be set back to the factory main
board set.
Format
：
Use for format SD card or U disk.
Press test key under the file properties equipment will be automatically output shown
below, the contents help you determine proper print parameters. Can switch over the storage
devices.
Press
at the machine working process
，
the machine will finish printing text or
graphics, press this button again machine will continue to work. Press return key in the
state of break ,print task will be cancelled.
Can delete the document in storage device, press this button in working process with
emergency will cancel print task. After press
，
Machine continue to work.
Returns superior menu.
Set parameters.
Select menu.
Confirm menu selection and document printing, etc.
(
四
) Output typing
⑴
commissioning
①
Install the ribbon and cloth in the center of equipment.
②
Press print head switch and reverse switch to prevent from draping.
③
Press the "test" button to see printing effect, if the result is not satisfied, please
adjust motherboard parameters and the print head position.
⑵
Print mode option choose
○
1 Online output
First click artcut toolbar
Select the option "search".
