background image

PRODUCT DESCRIPTION 

The ANTDA4161 is an active remote antenna for use with the Performance  
Series Wireless Systems. It offers an antenna gain stage of 60 dB, and an  
amplifier gain stage of 15 dB. Having the ANTDA4161 allows antennas to be 
placed up to 100’ (30 meters) away from the receiver without any loss of signal.   

SPECIFICATIONS

 

Frequency Band

 

     

500 - 700 MHz

Antenna Gain     

     

 

6 dB   

Amplifier Gain

         

 

5 dB or 13 dB  

    (dipswitch 

located 

inside 

 

    housing 

on 

antenna) 

Input Impedance

      

 

50 Ohm

Output

   

 

 

OIP3 > 38 dBm 

Effective working Angle 

 

Approximately 90 degrees

Connector

   

 

 

BNC  

Cable

      

 

 

RG58, 50 Ohm coaxial (not included) 

Net Weight

    

 

 

8 ounces / 227 grams 

SET UP

 

               

Determine whether to engage the 13 dB signal boost located inside the 
electronics housing. There is a gain setting inside the booster box located 
on the antenna (Figure 1). The default setting is 5 dB which covers up to 25’ 
of cable length. For longer runs (up to 100’), the 13 dB setting may be used. 
The dipswitch is located inside the weather resistant booster box. Remove 
the 6 Allen bolts and then set the dipswitch to 13 dB, then reattach the 
cover and Allen bolts. 

  

Mount the antenna system on to a mic stand. For permanent installations, 
the antennas may be placed on a wall or hung from the ceiling.

 

Connect the coaxial cable from each of the inputs on the receiver to the 
connector on the ANTDA4161. Be sure to use 50 Ohm cable.

 

Point and shoot the antennas directly at the transmitter source. (see figure 2)

 

Once the wireless system is in the performance mode, some  
experimentation may be required to find the best position. 

Mic Stand Adapter

ANTDA4161

ANTDA4161

Fig. 1

Fig. 2

ANTDA4161

Reviews: