Quick Introduction to AUDIUM Air! (With Digital Inputs)
Active Inputs are selected automatically according to a Priority (this can be changed in the Air Setup Menu).
Prio 1: AirPlay, Prio 2: SPDIF Input, Prio 3: TosLink Input
To adjust the volume, install a UPnP/DLNA App of your choice from the AppStore – we recommend „mconnectFree“,
„mconnect“ or „mconnectHD“. Or BubbleUPnP on Android.
Then connect your
Then start
Then select the device
Then Adjust the
device to the WLAN oft
mconnect
speaker as output
Volume
the AUDIUM Air Speaker
device („Play to“)
„AUDIUM-AIR-WLAN-xxxx“
Comments:
Active Input means, that there is signal on the input. Some devices produce Signal even in Standby, so you have to turn them
off completely, or assign them a lower priority.
You can check wether a device is detected as ON with the Input Monitor in the menu.
When Using AirPlay, you can adjust the Playback volume through the buttons on the side of your iPhone or iPad, but only while
you are playing Music with AirPlay. So, you have to assign a lower Priority to AirPlay, and play some music to keep the
connection active if you want to adjust the volume.
Therefore go to the menu, then
, then to
, and then adjust the apropriate input priority
