Quick Introduction to AUDIUM Air! (AccessPoint-Mode)
Connecting the speakers:
The Master has 4 Connectors:
IN 1 = coax SPDIF Input
IN 2 = optical mini TosLink Input
OUT = coax SPDIF Output
DC Input = Power Supply
The Slave has 3 Connectors:
IN = coax SPDIF INPUT
OUT = coax SPDIF Output
DC Input = Power Supply
Connect the OUT from the Master with the IN from the Slave with the supplied digital cable, and then connect the Power-
Supplies to the DC Inputs. The Master is booting, and after this shows the status screen:
Master:
Slave:
This symbol
indicates that the Speaker is in AP (Access-Point) Mode. What means it creates an own WLAN.
Now take your iPhone, iPad, Mac, or PC-Notebook and connect to this WLAN. It is calles AUDIUM-AIR-WLAN-xxxx.
There is no key neccessary to connect to it since it is an open WLAN. After this, use direct AirPlay Streaming or select the
speakers as output device in iTunes on your PC:
Here it is shown on the iPhone:
Select WLAN
Go To Status
Select AirPlay
Playback via AirPlay
