17
C
la
ss
ic
d
o
ma
in
ADVANCED MANUAL / TH due
1
2
3
TURN THE KNOB TO REGULATE THE LEVEL
PRESS THE KNOB FOR 3” TO CHANGE
THE RANGE FROM LO TO HI
Low level
1)
2)
High level
TURN THE KNOB TO REGULATE THE LEVEL
PRESS THE KNOB FOR 3” TO CHANGE
THE RANGE FROM HI TO LO
1 • LEVEL:
Adjusts both channels input sensitivity. It features 2 ranges, one “Hi” from .3 to 1.2 VRMS and
another “Low” from 1.2 to 4.8 VRMS. By keeping the knob pushed for three seconds you can change the
range. To see voltage value and range, check the ASC display. Those controls are also available if ACNet
sofware is used.
2 • STEREO-MONO:
By setting the switch on “Stereo” or “Mono” mode, the amplifier works in Stereo or Mono
(Bridge). When “Mono” is selected, the switch MIX / IN R is enabled.
3 • MIX / IN R:
If set on “MIX”, this switch enables the Left and Right inputs to drive the amplifier by mixing
both signals. When set on “IN R”, only the Right input signal drives the amplifier.
NOTE: sensitivity is automatically set on the lowest value of Hi Level range, but the difference
between the two levels could be dangerous for your system.
How to move from one sensitivity range to another
Input controls
Functions Description
WARNING: be careful when passing from LO to HI level!
Car audio and car goods internet store Winauto
winauto.ua
