APSP G6 /
17
INSTALLATION MANUAL
- GND
A
Fig. 17
Fig. 20
Fig. 19
Fig. 18
8.1.3
Lift the carpet from the floor in point
A
(Fig. 17)
and insert cables
C
(Fig. 14)
under the covering along
the slits provided in the carpet. Make sure that both the connectors and power supply cables
exit from the provided slots situated under the front right seat.
8.2
Passing the subwoofer power cable up to the left rear side of the boot
8.2.1
Insert the subwoofer's power cable
B
(Fig. 14)
through passage
A
(Fig. 17)
, and run it along the
door sill and through the rear bench seat and proceed until the left wall of the boot
(fig. 18 -19)
; the
cable must exit from the provided slot
(fig. 20)
.
8
