OWNER’S MANUAL
AV uno
/
8
6. REAR PANEL
1.
Protection fuse: 100 A;
2.
Power (Ground): Terminal block for the amplifier power supply negative pole connection. Insert here the battery
negative cable or wire connected to the vehicle chassis. The plug accepts cables up to 2 A.W.G. For better
current transfer it is recommended to use cables with the maximum cross-section possible and in any case of the
same cross-section of the cable connected to the positive pole;
3.
Power (11-15V DC): Terminal block for the amplifier 11÷15V DC power supply positive pole connection. Insert
here the battery positive cable. The plug accepts cables up to 2 A.W.G. For better current transfer it is
recommended to use cables with the maximum cross-section possible and in any case of the same cross-
section of the cable connected to the negative pole;
4.
+CAP: Terminal for connecting the positive pole of an external capacitor.
5.
Speaker A OUT: A Speaker and - power terminal; signal in mono.
6.
Speaker B OUT: B Speaker and - power terminal; signal in mono.
7.
Remote Sub Control: inputs for remote control of the VCRA Sub volume control (optional).
8.
Remote IN/OUT:
REMOTE IN: terminal for the remote cable coming from the device which turns on the amplifier.
REMOTE OUT: terminal to launch the remote voltage to turn on other amplifier. The output voltage is 12V 50 mA.
On this terminal the start-up control will be available for other devices even if Rem In is not in use and SPKs IN
(see 7.2)
are in use for starting-up.
6.1
HOW TO CONNECT POWER CABLES
6
AV uno
+ OUT -
+ OUT -
BATT GND CA
P
SUB VOL.
CONTROL
REMOTE
OUT IN
1
4
6
3
2
7
8
5
AV uno
+ OUT -
+ OUT -
BATT GND CA
P
SUB VOL.
CONTROL
REMOTE
OUT IN
L:
min
16
m
m
(5/
8”)
L:
ma
x 2
6 m
m
(1”
)
Ø M
AX
: 2
AW
G
Ground
Super
Capacitor
not provided
Fuse
Holder
not provided
Ground
Battery
Summary of Contents for AV uno
Page 31: ......
