3
OWNER’S MANUAL
AV due
/
1. INTRODUCTION
Coming directly from the know-how of the exceptional Thesis line, Voce components take the experience of listening
in the car to a new level of excellence.
Project innovation, advanced design, benchmark performance; the synthesis of consolidated know-how applied
to car audio systems. The Voce project was born to make Thesis sound quality available to a wider - but no less
demanding - audience. The development of these components took advantage of the major innovations introduced
while designing the Thesis line: analog and digital technologies combined using different classes of configuration for
amplifiers, reduction of the main sources of non-linear distortion, linearization of acoustic and electric loads, control of
cone and diaphragm resonance for speakers. To achieve these goals it was necessary to develop new circuit solutions,
increase heat capacity, design new moulds for baskets and diaphragms and define new assembly procedures and
quality control.
A delicate balance of analysis and refinement led us to results exceeding our expectations and set a new benchmark
for the category.
THE AV due AMPLIFIER PROJECT
AV due is a powerful stereo amplifier. The power supply section and final stage, designed to work also in mono and tri-
mode, ensure very high output current, with powers up to 900 W (RMS). AMP constantly checks the operating status
system and ART
TM
function allows automatic turn-on/off when a remote signal isn’t available from the source.
You can use VCRA volume remote control by connecting it to the special SUB VOL socket when you drive the subwoofer
in mono. There are endless handling possibilities, for every type of installation. AV due also allows you to replace the
analog input board with the digital one (AV bit IN).
1
