Installation
A Silencer product is a flightcase or furniture enclosure for a projector.
The main function of the unit is silencing the projector noice to acceptable
levels.
The standard Silencer set-up uses active airflow with forced ventilation.
No airco is used which results in low power consumption and low noise
production.
A Silencer must be installed properly and used according below
mentiond specifications.
A Silencer is a brand and type related product that will only
function with the projector it is designed for.
Maximum surrounding temperature 10 - 25 Degrees Celcius*
Apropriate fresh air ventilation
No direct contact** of silencer sides, top and bottom to ceiling or
structural components of the building
Only suitable for the determined projector brand and type
No air flow obstruction at the air intake and output.
Provide clean air, preventing over accessive air polution with dust,
chalk and other particles.
Regular check 100% functioning of all internal ventilators (life cycle
max.10.000 hours of the internal ventilators).
* The minimum and maximum surrounding temperature depends on the
factory provided data of the projector.
** Installation should per attached to the determined pre-installed
mounting point to the Silencer.
