Audipack MKT Series, Mounting Instruction

Page: 11 / 27

Detail A
Detail A
© AUDIPACK MKT Series-09-2008-06
A
9.1. Fine adjustment main mirror in opened position.
9.2. Fine adjustment main mirror in opened position.
α
1
2
1. Do not remove the red sealed nut!
2. Raw adjustment of the mirror (
α
). Release the 2 small srews on the rod-nut and slide it
to the correct position when the mirror is in aproximate end position. Fasten the 2 small screws after setting.
1
2
1. Release to adjust. Do not remove!
2. Fine adjustment (
a
α
). Release the small philips screw
to adjust the limit switch of the main mirror in opened position, by
turning the Hexbolt left or right. The end switch will set the right position.
When tested and approved, fasten the Philips screw again.
1
0