7.
Flat panel security.
When the flat panel is installed it is possible to lock it onto the lifting head.
Release the screws on the top to slide away or position the cover plate.
In case of using the standard L&S5 interface a single padlock can be used to secure the
set.
8. Maintanance / fine tuning.
It is possible to correct the horizontallevel of the floor stand.
It might be possible after a while it must be corrected.
Take away the C-cover and udjust the M8 screw.
Hold down the cable, do not let it rotate while adjusting the M8 bolt.
This might result in a twisted cable.
Use wrench
13 mm
to adjust.