Fold back the parts laying on the ground and turn the Stand at his
feet
See photo 3:
By doing the above in this manner the hands are able to hold all 4
parts.
Fold the parts upright as indicated on photo 4.
Mount the back-plate First hook 1 side to the mounting knobs and
then the other side. Then tighten
the knobs by hand.
Note:
the small part of the knob (see arrow on
photo 7)
must stick through the hole.
Photo 4
Photo 5
Mount the clamp (other type than on the photo), using the 4 star knobs. The tension which occurs on
the top part removes the last possible tolerance out of the Stand.
Tighten them firmly by hand (see photo 6)
Mounting knob, the arrow points to
the part which has to stick
through
the holes. Not on to the side.
Mount the Monitorbracket to the Plasma screen and hook it onto
the clamp. See photo 8. Turn the hooks on the clamp on to the
mounting knobs to secure the bracket.
Photo 3
Photo 6
Photo 8
Photo 7