audiowerkstatt din-restarter v2, Quick Manual, Page: 3 / 4

audiowerkstatt din-restarter v2
–
The audiowerkstatt din-restarter v2 helps you to stop and start the following "DIN-Sync"(also called "Sync24" or "Sync48")-device
in perfect synchronisation without stopping the masterclock.
Connectors:
9-12v:
Input for connecting a power supply [9-12V AC or DC (polarity doesn't matter)].
din-in: Input for connecting the output of the DIN-Sync -masterclock.
„ “
din-out: Output for connecting the input of the DIN-Sync -slave.
„ “
Function of the button and LED:
When you start the DIN-Sync24 -Sequencer connected to the din-in , the LED starts flashing every -note and the DIN-
„ “ „ “ ¼ „
Sync24 -Sequencer connected to the din-out is running.
“ „ “
When you press the red activate -button, the LED is inverted and the DIN-Sync24 -Sequencer connected to the din-out
„ “ „ “ „ “
stops at the start of the next bar and the LED goes out.
When you press the red activate -button again, the LED lights and the DIN-Sync24 -Sequencer connected to the din-out
„ “ „ “ „ “
starts at the start of the next bar in perfect synchronisation. The LED starts flashing again every -note.
¼
By holding the button when switching on, the device is started in "Sync48"-mode. It works the same as described before, but
receiving and transmitting DIN-Sync48 -signals at din-in and din-out instead of DIN-Sync24 -signals.
„ “ „ “ „ “ „ “
In this mode the activated -LED makes a continious double-flash .
„ “ „ “
Specifications:
Connectors:
din-in (5-pol DIN)
din-out (5-pol DIN)
Power (Plug 5,5mm, Pin 2,1mm)
Control elements: activate -button
„ “
Display elements: Status-LED activated
„ “
Power: 9-12V AC or DC (Polarity doesn t matter)
´
Dimensions: 112 mm x 72 mm x 48 mm
Weight: 260 g
Scope of delivery:
- audiowerkstatt din-restarter v2
- manual (german/english)
Contact:
audiowerkstatt UG (haftungsbeschränkt)
Weserstr. 78
12059 Berlin
Germany
info @ audiowerkstatt.de
http://www.audiowerkstatt.de
WEEE-Reg.-Nr. DE 49518480