128-7546
8 of 16
-8-
b. After making sure the connectors and guide pin hole
are properly lined up, gently lower the Xpress into
the mounting plate, and press down on the Xpress
to mate the connectors together. The raised detent
on the mounting plate will enter the notch on the
rear
of the Receiver, indicating the Xpress is properly
seated. The receiver should now be attached
securely to the mounting plate.
c. Apply power to the XMB10 by pressing the Power
ON/OFF button; the LED indicator lights blue. If
the Receiver does not turn on at the same time,
press the Power On/Off (
) button on the Receiver
front panel.
4. Removing the Receiver From the XMB10
Press the EJECT button on top of the Boom Box; the
receiver will swing out automatically. Gently grasp each
side of the Receiver at the top and pull straight up to
disengage it from the mounting plate.
INSTALLING/REMOVING
THE Xpress RECEIVER
Xpress
RECEIVER
INSTALLED
PUSH IN AT TOP TO
SECURE IN PLACE