128-7297
16 of 20
-
16
-
Wireless FM Modulator
The VOH8512 is equipped with buit-in wireless FM Modulator*, that allows you to listen to the VOH8512 audio signal by tuning yo
ur
vehicle’
s radio to the selected frequency
, (88.3, 88.7, 89.1, 89.5, 89.9MHz).
This feature is accessed by using either the FM
transmitter
buttons on the remote (ON/OFF
, Channel Select) or the FM Select button on the unit. Whenever the FM modulator is on, broadcast
reception on the vehicles radio will be poor
. Switching of
f the FM modulator will allow normal radio reception.
*NOTE
:
In certain areas where there are a large number of FM radio stations (e.g. large cities, urban areas), the reception of the FM
signal from the overhead pod may not be satisfactory
, resulting in st
atic, distorted sound or signal bleed thru from strong loc
al radio
stations. This is not a defect in the product, but the result of a stronger local radio station overpowering the wireless FM tr
ansmitter in
your overhead pod.
If wireless reception is unsatisfactory
, an optional wired relay box (Audiovox P/N SIRSWB) can be inst
alled which will improve
audio
quality
. Please cont
act the inst
aller if this is the case with your product.
A
V
1/A
V2 Input
The
A
V1/A
V2 video input may be connected to a DVD Player
, video game system, or other audio / video devices.
To
access the
A/
V input
s, turn the VOH8512 on and press the source button on the VOH8512 or the Source button on the remote control until “A
V
1”
or “A
V2” is displayed on the screen.
T
urn the video source component on with it
s power button or remote control.
The VOH8512 is
now ready to play the audio and video signals from the source connected to
A
V1/A
V2 input.
The
A
V1/A
V2 input requires a 8010730
cable.
AUX A/V Input
The VOH8512 will accept an audio/video signal input through the
AUX jacks located on the side of the unit.
The audio/video dev
ice
could be a video game system, video camera, or other input device (use the supplied
A
V
adaptor cable).
Video Out
The VOH8512 provides a video output for an optional video monitor(s). This output will provide a video signal that duplicates
the
signal displayed by the VOH8512 to an additional monitor or video display
. Please see your inst
aller for more inofrmation.
