Figure B
1) Make the connections to the vehicle for the 12 pin wiring harness.
2) Remove screws on PCB Cover. Open the cover to gain access to Mini-Din Connector on main
PCB. (Cover will remain attached to rivet hole).
3) Insert the Circular Mini-Din Connector of the source Component Harness through the wire tie loop
on the main PCB and into the Mini-Din Connector on the main PCB.
4) Pull the wire tie loop tight and cut off the excess.
5) Connect the Power Harness to the mating connector on the Video Monitor.
6) Connect the wired RF Modulator and / or the remote headphone jacks to the video monitor if those
options are being included.
7) Connect power harness to vehicle’s electrical system by tapping into an accessory hot line.
8) Reinstall PCB cover using the 2 screws.
9) Mount and connect the Television antenna.
10) Connect the FM radio antenna using the supplied 144" Adapter Cable and the "Y" Adapter (Refer to
Figure D.)
11) Verify all functions of the System before final mounting of the finished assembly.
Note: A second VCP or other A/V Component can be connected to the video monitor system using a
second Source Component Harness (purchased separately, part number: 8010730). This second
harness would plug into the second Mini-Din connector on the main PCB as in steps 2 and 3 above.
A/V Source Definitions:
1= TV Tuner
2= VCP (right Mini-Din on main PCB)
3= 2
nd
VCP (or game or future DVD, etc.…. left Mini-Din)
-7-
VOH684/VOH704
Antenn a
Dash Ra dio
R ed RC A (Audio Rig ht)
IR LE D :
C le an the I R R eceive r W ind ow on the fro nt of the VCP.
R emo ve A dhes iv e Bac k ing a nd App ly IR LED t o IR
Window o n the F ac e of th e VC P.
Blac k
(Ground )
O ption al External S peakers
G ray
(Left+ )
G ree n
(R ight +)
Ac ce ss ory
H arnes s
Item # 2
Ye llo w RC A (Vid eo)
Wh ite R C A (Audio Left)
LE FT
WH I TE
R IG HT
R ED
R e d: + 1 2 V D C
( A c c es s o r y C ir.)
P o w e r H a rn e s s
Item # 4
*R ef er t o Ins truc tions with the R F
Mod ulato r K it fo r fu rthe r d etails.
FM
M odu lator
O ption al H ard W ired F M M od ulato r O utpu t
12 V DC Powe r an d Groun d
B la c k : G ro un d
R ig ht
Inpu t
Left
Inpu t
N ote: cables
ex iting the pod
s hould be routed
as sho w n.
Mini-D in C onnec tors
T V an tenna
(If applic able)
"Y" A dapter
for us e w ith
N on-Ste reo
Ins tallations
Item # 5
To Seco nd ary AV M on ito r
Auxillary
video d ispla y
12 V DC Powe r an d Groun d
IN PU T
VID E O
LIN E
O U T
VID E O
TO
FACTORY
RADIO
107 0610
c ho ke
Am/Fm
TO
OPTIONAL
ADDITIONAL
M OINTOR
R CA-F em ale
R CA-F em ale
Pa tch C o rd
2
1
Ac ce ss ory
H arnes s
Item # 2
R CA-F em ale
Pa tch C o rd
R C A Ma le to Male
R C A Ma le to Male
P ower Connecto r
4 Pin
Connect to FM radio antenna
or equivalent.
12 Pin Power signal