Sleep Mode:
Your controller will automatically go into Sleep Mode after approximately three minutes
if not used. The MODE LED indicator will go off. To reactivate the controller, you have
a choice to press the START button or press down on one of the joy sticks on the controller.
Your controller will automatically synchronize with the receiver in the PS 2 unit.
Turning Off the Controller:
Place the ON/OFF switch on the controller to OFF if it will not be used for
a long period of time to preserve battery life.
If Your Controller Does Not Synchronize:
1. If the red MODE LED indicator on your wireless controller does not activate, switch the controller off, wait three seconds, and switch it
back on using the ON/OFF switch on the front of the controller.
2. If this does not activate the red MODE LED, switch the controller back off. Turn off your PlayStation2 console and remove the wireless
receiver(s). After this is done, reconnect the receivers, turn on your PlayStation2 console and turn your controllers back on.
3. If this does not activate the red MODE LED, check the batteries and replace as needed.
4. After checking and/or replacing the batteries, repeat step 2 for activation.
Low Power Warning Function:
Under low battery conditions, the MODE LED will flash and the vibration motors will automatically turn off.
Vibration:
Games with the vibration feature will enable the vibration in the controller. Vibration can not be disabled.
Safety Precaution: Stop using this unit immediately if you begin to feel tired or if you begin to feel discomfort or
pain during use. Do not use the vibration function if you have an ailment or injury to the bones, joints or muscles
of your hands or arms.
16
START button
Joy Sticks
