19
* I
SETTING THE CABLE TV MODE
1) Press the SET button three times to enter the TV/Cable configuration mode.
2) CABLE or AIR will appear on the display.
3) Press the SEEK button to select Cable mode.
4) Press the CH UP/DOWN button(s) to select the desired cable mode (STD/IRC/HRC).
5) When the desired mode is reached, press the ON/OFF button to confirm.
SETTING THE AIR TV MODE
1) Press the SET button three times to enter the TV/Cable configuration mode.
2) Press the SEEK button to select the AIR mode.
3) Press the ON/OFF button to confirm.
SETTING THE SPEAKER MODE
1) With power off, press the SET button four times to enter the speaker configuration mode.
″
ISP (or ESP)
″
appears on the VFD.
2) Press the seek button to toggle between the
″
I SP
″
and
″
E SP
″
3) When the desired mode is reached, press the ON/OFF button.
SETTING THE INTERCOM MODE
4) With power off, press the SET button five times to enter the intercom
configuration mode.
″
Int On (or Int OFF)
″
appears on the VFD.
5) Press the seek button to toggle between the
″
Int On
″
and
″
Int OFF
″
6) When the desired mode is reached, press the ON/OFF button.
nt OFF : default, No response to call signal.
SETTING THE PRESETS (IN AM, FM OR TV MODES)
1) Tune to the desired channel/station.
2) Press the SET button and the display flashes.
3) Press desired preset (P1, P2, P3 & P4) to confirm the selection.
NOTE: you can preset 4- AM, 4- FM and 4- TV Programs