background image

YOUR ANTI - CODE GRABBING TRANSMITTER:

The four button transmitter included with your security system employs one of the
most secure means of radio frequency transmission available in today's automotive se-
curity systems. Some of the more sophisticated thieves use what is known as a
code grabber. This device is capable of capturing, storing, and then rebroadcasting your
transmitter's code at a later date to disarm your alarm. Your anti-code grabbing
transmitter changes it's code every time you press a button. This changed code is
anticipated by the alarm and your system responds. If a thief captures your
transmitter code in an attempt to rebroadcast it a later date, the alarm, expecting
a different code than what was captured, ignores what the thief transmits. This
makes this system nearly impossible to defeat with a code grabber.
Because of this sophisticated technology, if the transmitter is operated more than
50 times away from the alarm system, it is possible for the unit to go out of
synchronization. If this occurs, simply pressing the arm/disarm transmitter button 2

times within 1 second will realign your transmitter to the alarm. Once realigned,
normal operation is resumed.

PRO-9744:

Your Security System has many features and available options, some

of which were selected or added during installation, others can be added at any
time. For your reference, a wallet card provided with your system lists the optional
devices which have been added to your vehicle, as well as show which transmitter
button(s) will be used to activate them. Taking a few minutes to read this manual,
along with the wallet card, will provide you with a better understanding of the
system's operation and it's features.

-3-

existing electric garage door, program this transmitter button

following the program instructions supplied with your AS-9254 kit.

When within range of your garage, press and release this button one

time to open or close your garage door.

LOCK/UNLOCK:

The transmitter button with the combined lock and

unlock symbol on it will allow the operator to lock all doors and arm
the alarm system, as well as unlock and disarm the alarm system.

The system can be configured to unlock only the driver's door, or
unlock all doors.

Additionally the system can be configured to unlock the driver's door
then by use of a second button, unlock all remaining doors.
The manner in which the system unlocks the door(s) can be configured at
time of installation to accommodate your personal preference.

OPTION:

The transmitter button(s) with the word option, option 1, or

option 2, is available to allow remote control of any optional device
added to your vehicle. Some of the more popular devices are window up,
window down, electric sun roof open or close, fuel door release, etc.... To
operate the optional device, press and release the option button one time.

Summary of Contents for Pursuit PRO-9744WOS2









Reviews: