ELIMINATING THE ARM / DISARM CHIRPS :
The normal arming and disarming confirmation chirps can easily be turned off using the
valet pushbutton switch. To do this;
1. Turn the ignition key on, and then off.
2. Within 10 seconds of turning the ignition key off, press and release the valet switch
3 times.
3. a. If, before proceeding with step 1, the chirps were on, then you will hear 2 chirps
to indicate that the chirps have been turned off.
b. If, before proceeding with step 1, the chirps were off, then you will hear 1 chirp
to indicate that the chirps have been turned on.
4. Whenever power to the system has been disconnected ( for repair or service to the
vehicle ), the chirps will be activated when the power is re - connected. To turn the
chirps off, simply execute steps 1 through 3 above.
NOTE : Whenever the Arm/Disarm chirps are by-passed, the 3 chirp defective
zone and the 4 chirp intrusion indicator will always operate. This feature
will always warn you if a door was left ajar when arming, or the vehicle was
tampered with in your absence.
Page 7
