128-6266
7 of 16
-7-
cn
PAUSE (PAU) BUTTON
The Pause function is used to freeze disc play when the CD player
or optional CD changer is in use. PAUSE will appear flashing on
the display. Press this button again to resume disc play; the PAUSE
indication will disappear.
co
TRACK SCAN (SCN) SELECT
During disc play, press this button to play the first 10 seconds of
each track on the disc (SCAN) will appear on the display panel).
When a desired track is reached, press the SCAN button again to
cancel the function (SCAN will disappear from the display panel)
and play of the selected track will continue. Scan mode will also
be canceled by activating Repeat Play
cp
, or Shuffle Play
cq
.
cp
REPEAT PLAY (RPT) SELECT
During disc play, press this button to repeat the play of the selected
track (RPT will appear on the display panel). Play of the track will
continue to repeat until the button is pressed again and the RPT
indication disappears from the display panel. Repeat Play mode
will also be canceled by activating the Track Scan
co
or Shuffle
Play
cq
functions.
cq
SHUFFLE PLAY (SHF) SELECT
During disc play, press this button to play the tracks on the disc in a
random shuffled order (SHF will appear on the display panel). In Shuffle
Play mode, the TRACK Select function
cl
will also select tracks in the
random order instead of the normal progression. The Shuffle Play mode
can be canceled by pressing the button again (SHF indication will disappear
from the display panel) or by activating the Repeat Play
cp
or Track
Scan
co
functions.
cr
DISC SELECT UP/DOWN (D.UP/D.DN)
These buttons are used to select the desired disc for play during
changer operation. To advance to a higher number disc, press the
D.UP button, and to return to a lower number disc, press the D.DN
button. The number of the disc in play will be shown on the display panel.
cs
DISC EJECT ( )
Disc play is stopped and the disc is ejected when the front panel is
folded down and this button on the rear of the panel is pressed.
Radio or CD changer operation will automatically resume depending on
which mode was in operation prior to disc play. If the disc is not
removed from the unit within 15 seconds of being ejected, it will
automatically be re-loaded into the unit to prevent it from being
accidentally damaged (
will appear on the display panel to
indicate that a disc is loaded in the player). Play of the disc can be
resumed by using the MODE button
bt
to choose CD player function.
ct
TIME/FREQUENCY (T/F) DISPLAY BUTTON
During radio operation, press this button to call the time display on
the incorporated quartz clock. The current time will appear together
with an A or P indication. The display will return to the radio frequency
indication after 5 seconds.
During CD player operation, a second press of this button will call
the time display. During CD changer operation the first press of
the button will call the time display. In either case, the display will
return to the disc indication after 5 seconds.
cu
EQUALIZER BUTTON (EQ)
The EQ button applies preset sound effects to the unit’s audio output
signal. The EQ button, when pressed, will activate one of the following
operating modes: CLASSICS, POP, JAZZ, FLAT,or DSP OFF. When
the EQ function is active, as displayed on the panel, the bass and
treble levels cannot be changed. When the EQ function is not active,
the unit returns to the user set bass and treble levels. The FLAT
selection indicates no equalizer enhancement of the program, while
DSP OFF inhibits selection of equalizer mode enhancement.
