background image

-9-

dm

TRACK/DISCSHUFFLE(SHF)

When the Shuffle button is pressed, the

SHF

indication will ap-

pear on the display panel and the tracks on the disc will be played
in a random, shuffled order. The Track Select buttons

cu

will

also select tracks in the shuffled order instead of the normal pro-
gression. The Track Shuffle mode can be cancelled by pressing
the Shuffle button again or by activating the Repeat

dn

or Scan

do

functions.

When the Shuffle button is pressed and held longer than 2 sec-
onds, the DISC and

SHF

indications will appear on the display

panel and the discs in the magazine will be played in a random,
shuffled order, as well as the tracks on each disc. When all tracks
on the selected disc have been played, the next disc will be se-
lected in shuffled order and its tracks will be played in shuffled
order. The Disc Shuffle mode can be cancelled by pressing the
Shuffle button again or by activating the Repeat

dn

or Scan

do

functions.

dn

TRACK/DISC REPEAT (RPT)

When the Repeat button is pressed, the

RPT

indication will ap-

pear on the display panel and play of the selected track will be
continually repeated until the Track Repeat mode is cancelled by
pressing the Repeat button again or by activating the Shuffle

dm

or Scan

do

functions.

When the Repeat button is pressed and held longer than 2 sec-
onds, the DISC and

RPT

indications will appear on the display

panel and play of the selected disc will be continually repeated
until the Disc Repeat mode is cancelled by pressing the Repeat
button again or by activating the Shuffle

dm

or Scan

do

func-

tions.

do

TRACK/DISC SCAN (SCN)

When the Scan button is pressed, the

SCAN

indication will ap-

pear on the display panel, and the first 10 seconds of each track
on the disc will be played in order (the track number on the display
panel will flash during Scan mode). When a desired track is
reached, press the Scan button again and play of the selected
track will continue (

SCAN

will disappear from the display panel).

The Track Scan mode will also be cancelled by activating any
other disc function (Select, Cue/Review, Shuffle or Repeat).
When the Scan button is pressed and held longer than 2 sec-
onds, the DISC and

SCAN

indications will appear on the display

panel and the first 10 seconds of the first track on each disc in the
magazine will be played (the disc number on the display panel will
flash during Disc Scan mode). When a desired disc is reached,
press the Scan button again and play of the selected disc will
continue ( DISC and

SCAN

will disappear from the display panel).

The Disc Scan mode will also be cancelled by activating any other
disc function (Select, Cue/Review, Shuffle or Repeat).

Summary of Contents for Prestige P-72

















Reviews: