-2-
BEND BOTTOM TABS
DOWNWARD
PERFORATED STRAP
FASTEN THIS END TO
SCREW STUD ON
REAR OF CHASSIS
BEND TOP TABS
UPWARD
MOUNTING SLEEVE
NUT (5MM)
FASTEN THIS END TO SECURE
PART OF DASHBOARD.
DRILL HOLE IF NECESSARY.
SCREW
(5MM)
NUT (5MM)
SCREW STUD
DETACHABLE
FRONT PANEL
RADIO
EXISTING DASH OPENING
FILE EDGES TO FIT IF NECESSARY - DO NOT OVERFILE
NOTE: IF DASH IS SOLID, USE REAR SIDE (WITHOUT THE
LIP) OF MOUNTING SLEEVE AS A TEMPLATE AND
CUT OPENING
REMOVAL
TOOLS
UN-SNAP AT 2 PLACES
EACH ON TOP AND
BOTTOM
REMOVE THE FRAME FROM THE FRONT OF THE
CHASSIS BY CAREFULLY UN-SNAPPING IT.
ISO INSTALLATION
FACTORY
MOUNTING
BRACKETS
MAX.
SIZE
M5 x 8
TYPICAL INSTALLATION
UNIVERSAL INSTALLATION USING MOUNTING SLEEVE
MAX.
SIZE
M5 x 8
