Audiovox Prestige 105BP Programming Manual Download Page 7

128-8777

7 of 8

7

1)Name: _______________________________________

2)Address: ______________________________________

3) City: ________________ State: _____ Zip Code: ________

4) Telephone Number: (_____) _______________
5) Total Number Of Transmitters Required:

Cost Per Transmitter is:

$75.00

Multiply By Number Of Transmitters            X ______

6) Enter Total Amount Enclosed _________________

(New York State Residents must include the appropriate sales tax)

7) Method of Payment:

 

 

Mastercard 

 Visa 

 Check or Money Order (do not send cash)

Make Checks Payable To Audiovox Corporation

Credit Card Number:
_________________________________

Credit Card Expiration Date: ____ / _____ / _____

8) Mail this form along with your payment to:

ORDER FORM FOR  105BP Transmitter

Audiovox Electronics Corp., 150 Marcus Blvd., Hauppauge, N.Y., 11788

Attn.: TRANSMITTER DEPARTMENT

Credit card purchasers can order additional or replacement
transmitters by phone. Simply dial 1 - 800 - 645 - 4994, and
follow the instructions from the operator interface.

Attention: Transmitter Ordering Department
Important:

  To help us expedite your order, please print all of the

information legibly and mail this form and your  payment
according to the instructions below.
Indicate the pad number of your transmitter selected from the
pads shown above.
Note: Transmitter model number found on back of case.

Summary of Contents for Prestige 105BP









Reviews: