Audiovox PPC 6600 - Smartphone - Sprint, Getting Started Manual, Page: 5 / 13

7 6
s e t t i n g u p y o u r d e v i c e f o r w i r e l e s s u s e
Your device should already be programmed by your Bell Mobility or Bell World
representative for use on the Bell Mobility network. You should have the following
information :
i. Mobile Number
ii. Voice mail password (4-digit number)
If you are missing any of the above information, please call Bell Mobility Customer
Service at
1-800-667-0123 prior to starting this process.
Setting up the Connection:
Make sure your wireless connection is enabled before you start (this will allow you to
use the phone and access data). To do so, you must ensure that your connection
reads
Flight Mode OFF.
What is Flight Mode ?
On all airplane flights, you are requested to turn off your wireless device. When
you are getting ready for take-off, you should enable
Flight Mode . Therefore,
when your PPC-6600 has Flight Mode ON , it means that your phone has been
turned off. In this mode you will still be able to access offline information
including Calendar, Contacts, etc. and will also help conserve battery power since
the device is not being used for wireless access.
When Flight Mode is OFF , your phone is turned
on and you are able to make calls and access
data (i.e. Internet & E-mail). Your
Flight Mode
should always be OFF unless you need to
completely shut down your device.
To turn Flight Mode ON , which turns your
phone off, tap the icon and then tap ‘ Turn
on Flight Mode ’.
To turn your Flight Mode OFF , which turns your
phone on, simply tap on the icon. Then, tap
‘ Turn off Flight Mode ’.
1. Go to ‘ Start ’, then ‘ Settings ’.
2. Tap on the ‘ Connections ’ tab.
3. Tap on ‘ Connections ’.
4. Tap ‘ Manage Existing Connections ’.
5 . Under ‘ Cdma2000 ’, tap and hold ‘ CDMA1X ’ until the
‘ Delete/Connect ’ menu appears.
6. Tap ‘ Connect ’. When you see , it means a data
connection has been established.
7. Tap ‘ OK ’.
To disable your wireless DATA connectivity, simply hold
down button for a minimum of 5 seconds. You
know your data connectivity is disabled when you see
the
and icon. Your device will then be ready for
making and receiving voice calls.
Note: While you are using Pocket Explorer , if it is in the process of trying to
download the page, hitting the button will not terminate the data connection.
The device will try to reconnect instead. Wait until the web page has finished
downloading and then hit the
button to end the data session.
To start a data connection:
Once you have successfully set-up your 1X connection, ensure Flight Mode is OFF ,
and your phone is turned ON . To do this:
i. Tap
ii. Tap #777, when you see , it means a data connection has been
established.
Once connected, you can:
• Send and receive e-mail messages by using Messaging . Before you can use
Messaging , you need to provide the information it needs to communicate with the
e-mail server. For specific instructions, see Setting Up Your POP3 E-mail Account
(see next page).
• Visit Web and WAP pages by using Pocket Internet Explorer .
Note: A pop-up screen will appear once you begin connecting, and leave when the
connection is complete.
2297_Bell_PCC6600_GSG_R7 3/22/05 9:25 AM Page 6