PRESET STATION TUNING
ÿ
Select band.
1.
Switch on.
2.
3.
ÿ
Press the desired preset station button.
The number of the pressed preset station but-
ton appears next to the frequency indication.
Active tuning reception control (ATRC)
This unit automatically suppresses FM stereo noise
caused by varying signals strength resulting from
movement of the car.
•
The built-in automatic blending circuit mixes
the left and right channel signals according to
the strength of the reception. At the same time,
the high-cut circuit activates to maintain the
sound quality.
•
If the reception becomes even weaker, the unit
automatically switches to Monaural mode to
reduce noise.
RADIO OPERATION
ÿ
Select
band.
1.
Switch
on.
2.
3.
Press and hold AS/PS for
more than 2 seconds.
You can preset up to 6 stations in each band
FM1, FM2, FM3, AM1 and AM2.
•
If the unit could not search for all of 6 stations,
LOCAL indicator goes off and starts searching
for weaker stations again.
•
When auto memory is completed, the preset
stations are automatically scanned in order.
•
To stop auto memory, press AS/PS again.
To check the preset stations (preset scan)
•
If you wish to check the preset stations, press
AS/PS for less than 2 seconds. The preset
stations stored in memory will be tuned in for
5 seconds each in order.
•
To stop this function, press AS/PS again or
press any of the preset station buttons 1 to 6.
STORING THE STATIONS IN
MEMORY AUTOMATICALLY (AS/PS)
FM1
FM2
FM3
AM2
AM1
FM1
FM2
FM3
AM2
AM1
