background image

HIGH PERFORMANCE 2/3-WAY ACTIVE CROSSOVER

This unit has been designed to provide high quality performance with a minimum of
maintenance.  However, it's performance will only be as good as the care and quality
of components with which it is installed.  We therefore advise that you read these
instructions very carefully to familiarize yourself with the product and it's features.
Should you require assistance with the installation or wiring of this unit, please call
our toll-free "HELP" line at 1-800-645-4994 during the days/hours shown.

Monday-Friday
Saturday

8:30am-7:00pmEastern
9:00am-5:00pmEastern

1-800-645-4994

-1-

SPECIFICATIONS

*

 Due to continuing improvement, Audiovox reserves the right to change features and design without notice.

Frequency Response:

10 - 50,000 Hz. ± 3 dB

Signal / Noise Ratio:

92 dB (A-Weighted)

Distortion:

0.01%

Input Impedance:

10K ohms

Output Impedance:

100 ohms

Bass Boost:

+ 8 dB @ 45 Hz.

Crossover Slope:

18 dB/octave

Crossover Frequency

Subwoofer Low-Pass:

30 - 500 Hz.

Midrange High-Pass:

63 - 500 Hz.

Midrange Low-Pass:

2,000 - 4,500 Hz.

High High-Pass:

2,000 - 6,000 Hz.

Supply Voltage:

12 volts D.C., negative ground

Fuse Rating:

1 amp.

Dimensions (W x H x D):

8-1/4"  x  1-1/4"  x  7"
210 mm  x 31 mm x 179 mm

HELP!

Summary of Contents for Menace PX-300













Reviews: