-8-
OPERATION INSTRUCTION
Button Functions
There are six buttons on the front of the monitor: POWER, SOURCE, WIDE, MENU (Master Only)
or PICTURE (Slave Only), VOLUME - and .
1) POWER
: Pressing this button will turn the unit on/ off.
2) SOURCE
: Pressing this button will select between AV1 and AV2.
3) WIDE
: Allows the user to change screen format (Aspect Ratio , 4:3 or 16:9).
4) MENU
: This button is only on the Master monitor. Pressing this button, will display the
menu OSD. After opening the menu, it is used as the Enter function.
5) PICTURE
: This button is only on the Slave monitor. Pressing this button will display the
picture adjustment menu: BRIGHTNESS, CONTRAST, COLOR, TINT.
6) VOLUME -
: Decrease the volume of the Wired Headphones with VOLUME- button.
: Increase the volume of the Wired Headphones with button.
Also, with the menu displayed on the screen you may then use the VOLUME- and
buttons to select from: Picture, Source, Audio (Master only) and Display off. When the appro-
priate item is highlighted you may then press the MENU button to access that function, then
use the VOLUME- or to adjust or switch the selected item.
OSD
1) Press the MENU button (
on Master monitor
) or MENU/ENTER button (
on the master remote
control
) , the following OSD is displayed:
a)
For using the Master monitor:
MENU
PICTURE
SOURCE
AUDIO
DISPLAY OFF
Use VOLUME- or buttons to highlight the AUDIO item, then press MENU/ENTER
button, OSD as below :
AUDIO
AUDIO 1
AUDIO 2
Use VOLUME- or buttons to select the audio for the FM Modulator. (Blue lettering
indicates the audio source has been selected at the moment).
b)
For using the Slave Monitor:
The Slave monitor cannot select the audio source for the FM Modulator, so the OSD "AUDIO"
does not appear in the slave menu.
MENU
PICTURE
SOURCE
DISPLAY OFF
c) Select DISPLAY , then press the MENU button, this item will change to "DISPLAY ON", that
means the source number selected will be displayed on the monitor until "DISPLAY OFF" is
selected.
