-6-
REMOTE CONTROL OPERATION
1.
TV Controls:
1.
TV POWER
Press this button to turn on the set.
Press the button again to turn the set off.
2.
Direct Access (0-9,1--) Number Buttons
Use these buttons to select a channel. The channel number chosen will be displayed on the screen for
about four seconds. To select channels 0-99, press two number buttons. For example, to select
channel 8, press 0,8. To select channels above 100, press the 1—button, then the number buttons for
the last two digits of the channel. For example, to select channel 115, press 1--, 1, 5.
3.
CHANNEL Up and Down
Use these buttons to select pre-programmed channels or two select channels up or down. (also used
to select desired function on the menu).
4.
VOLUME Up and Down
Use these buttons to raise or lower the volume level of the Wired Headphones or External Speakers if
installed. They are also used to make adjustments in the picture select mode.
NOTE:
These buttons will not affect the volume of wireless headphones or a wired RF modulator.
When using these devices the volume must be adjusted with the headphone volume control or with
your radio’s volume control.
5.
MENU Button
Press the MENU button. The MENU display appears. Use the Channel up and down buttons to select
desired function, then press ENTER button to end the choice.
