128-7027
3 of 28
CAUTION
SAFETY INFORMATION
Your wireless hand-held portable transceiver contains a low power
transmitter. When the PTT button is pushed (or the VOX mode is enabled)
it sends out radio frequency (RF) signals. The device is authorized to operate
at a duty factor not to exceed 50%. In August 1996, the Federal
Communications Commissions (FCC) adopted RF exposure guidelines
with safety levels for hand-held wireless devices.
Important:
To maintain compliance with the FCC’ s RF exposure guidelines
hold the transmitter at least 1 inch (2.5 centimeters) from your
face and speak in a normal voice, with the antenna pointed up
and away. If you wear the handset on your body while using the
headset accessory, use only the Audiovox supplied carry clip
for this product and ensure that the antenna is at least 1 inch
(2.5 centimeters) from your body when transmitting. Use only
the supplied antenna. Do not use your transceiver with a
damaged antenna. Unauthorized antennas, modifications, or
attachments could damage the transmitter and may violate
FCC regulations.
Performance:
Your transceiver will only achieve its maximum operating range when
communicating with other transceivers across open and flat areas or
between elevated points. Normally occurring environmental factors such
as buildings, trees, terrain and weather, or interference from other radio or
electrical equipment, may have adverse effects on the transceiver’s effective
range. These are not indicative of a fault condition.
Avoid placing the GMRS602 radio transceiver for prolonged periods of
time in direct sunlight or temperatures below -4
°
F(-20
°
C) or above
140
°
F (60
°
C).
Place the rubber cover on jacks when not in use.
3
Summary of Contents for GMRS602
Page 2: ...128 7027 2 of 28 THIS PAGE LEFT BLANK INTENTIONALLY 2...
Page 22: ...128 7027 22 of 28 22 THIS PAGE LEFT BLANK INTENTIONALLY...
Page 27: ...128 7027 27 of 28 THIS PAGE LEFT BLANK INTENTIONALLY 27...
Page 28: ...128 7027 28 of 28 2004 Audiovox Electronics Corp Hauppauge NY 11788 128 7027 Printed in China...