incoming signal, the Transmit/Monitor LED indicator will light
green
and the received
signal strength indicator (
) will display the relative strenth of the signal.
The PTT Button can also be used as a two-way call ringer Pressing the button twice
quickly will call another party on the same channel. The Transmit LED will light
red
for
approximately 3 seconds and then go out.
Up Channel/Volume Button (10)
In the standby mode, pressing this button will increment the listening volume. When in
function edit mode this button will be used to adjust the unit's settings.
Down Channel/Volume Button (11)
In the standby mode, pressing this button will decrement the listening volume. When in
function edit mode this button will be used to adjust the unit's settings.
Mode Button (12)
This button is used to select various feature settings in the GMRS or weather band
mode. Holding the MODE button longer than 2 seconds will toggle between the GMRS
and weather band modes.
Emergency (EMO) Call Button Button (14)
This radio has a quick access button (EMO) to the Emergency and Assistance Channel.
This channel is not monitored by local authorities. When using this channel,
EMG
appears on the display. Pressing this button will set the transceiver to the channel 10,
462.6750 MHZ).
External Speaker (SPK)/Microphone (MIC) Jacks (6)
This set of jacks accepts an Audiovox headset/microphone connector for total hands-free
operation.
Scan/Lock Button (13)
Press this Button momentarily to enable or disable the scan mode. Press and hold Button
for more than 1 second to lock or unlock the key pad, except PU and Monitor (M). When
the keypad the ( ) icon will display in the top right corner.
