Operating Instructions
1) ON/OFF POWER BUTTON
Press this knob to turn the unit on or off.
2) VOLUME CONTROL
To increase the volume level, turn this knob clockwise. The volume will increase
with each detent position of the control and level will be shown by the bars on the
display panel. To decrease the volume level, turn the knob counter-clockwise.
3) AUDIO FUNCTION SELECT (SEL)
AUDIO FUNCTION LEVEL CONTROL
VOLUME LEVEL MEMORY
This knob is used to select the audio function (bass, midrange, treble, balance, or
fade) to be adjusted.
Pressing the Select knob will select the audio functions in sequence of bass
(“BAS” on the display panel), midrange (“MID”), treble (“TRE”), balance (“BAL”),
and fader (“FAD”). After selecting the desired audio function, adjustment is made
by turning the knob as appropriate. The display will automatically return to the
volume indication 5 seconds after the last adjustment is made.
This knob is also used to set memory for the volume level, which will be recalled
when the unit is turned on. To set the volume memory, turn the unit on and
adjust the volume using the Volume Control (2) to the level that you wish to be
recalled when the unit is turned on. Then, press the select knob and hold it for
approximately 2 seconds. The volume level bars on the display panel will flash
twice and the volume is now set in the memory. If the unit is turned off with the
volume higher than the memory setting, the unit will return to the memory setting
when turned back on. If, however, the unit is turned off with the volume lower
than the memory setting, the unit will return to the lower setting when turned back
on.
