background image

Remote Control(Continued)                                   

Preparation of Remote Control 

Softly push the back cover plastic latch to open 

the battery compartment. 

 

 

 

 

 

 

 

Insert two batteries (1.5V, size AAA), please 

make sure the polarity matches the marks 

inside the compartment. 

 

 

 

 

 

 

 

Softly press the back cover to close it. 

 

 

 

 

 

 

 

 

 

Under normal use the battery will last for six 
months. 

 

Remove batteries when the remote is not 

going to be used for a long time.

 

 

 

 

Using Remote control 

Point the remote control from no more than 

about 20 feet (7m) from the remote control 

sensor and at an angle of 60 degrees from the 

front of the unit. 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

   

The operating distance may vary 

depending on the brightness of the 

location. 

 
Notes: 

   

Do not point bright lights directly at the 

remote control sensor. 

   

Do not place objects between the remote 

control unit and the remote control sensor. 

   

Do not use this remote control unit while 

simultaneously operating the remote 

control unit of any other equipment.   

 

 

 

- 11 - 

Summary of Contents for FPE2706DV













































Reviews: