30
• To repeat a segment between two points (A and B), press
REP A-B
(on remote
control) at the beginning of the segment you want to repeat. Allow the disc to play
to the end of the segment to the end point (B). Press
REP A-B
(on remote control)
again at the end of the segment. The segment plays repeatedly until you press
REP
A-B
(on remote control) to resume normal playback.
Note:
Repeat function is only available on remote control.
Angle
Some discs offer different camera angles for specific scenes.
• To change the camera angle, press
ANGLE
(on remote control) repeatedly to select
the camera angle.
•
If the disc was recorded using a single camera angle, this function is not available.
Note:
If you want to access the angle function, adjust the setting through Setting
menu before pressing
ANGLE
on remote control (refer to the General Setup Page
section).
