AC POWER
You can power your portable stereo system by plugging the detacha-
ble AC power cord into the AC inlet on the back of the unit and into a
wall AC power outlet.
Check that the rated voltage of your unit matches your local voltage.
Make sure that the AC power cord is fully inserted into the unit.
Caution: (for USA)
To prevent electrical shock, match
wide blade of plug to wide slot,
fully insert.
Note:
When not being used on mains the
AC Cord should be unplugged
from the unit.
NAMES OF CONTROLS
RADIO OPERATION
You can listen to your favourite radio stations by sliding the
FUNCTION
switch to RADIO, and then
1.
Slide the
BAND
switch to choose AM(MW) or FM.
2.
Using the
TUNING
control to choose a desired station.
• Adjust the
VOLUME
.
• Repositioning the unit to get better AM(MW)/FM reception.
POWERING UP
BATTERY POWER
Insert 6
"C"
size batteries in the battery compartment. Be sure that the
batteries are inserted correctly to avoid damage to the unit.
• Always remove the batteries when unit will not be used for a long
period of time, as this will cause leakage of the batteries and
subsequently damage to your unit.
• Playback will automatically come to a stop when the batteries have
no more power. Replace all the batteries with new ones.
• Do not mix old and new batteries. Do not mix ALKALINE, standard
(CARBON-ZINC) or rechargeable (NICKEL-CADMIUM) batteries.
Note
When you have finished listening, slide the
FUNCTION
switch to OFF.
AM(MW)/FM
VOLUME
Adjust the
VOLUME
control of the stereo system to a desired level.
For private listening
Connect headphones (Ø 3.5 mm stereo mini-plug) to the
PHONES
jack.
When only headphones are connected the speakers are automatically
disconnected.
ADJUSTING THE SOUND
1.
Slide the
FUNCTION
switch to CD. "
" is shown in the display.
2.
Open the CD door. Place a disc in the centre with the label side
up and then close the CD door gently. The total number of tracks
will show in the display.
3.
Press the
PLAY/PAUSE
button to start play. The
PLAY
" "
indicator will light.
• Adjust the
VOLUME
.
USING THE CD PLAYER
TO STOP PLAYBACK
• Press the
CD STOP
button to stop disc play.
TO INTERRUPT PLAYBACK
• Press the
PLAY/PAUSE
button while a CD is playing to pause
play (the
PAUSE
" " indicator will blink).
• Press the
PLAY/PAUS
E
button again to resume play.
TO SKIP TO THE BEGINNING OF A TRACK
• Press either one of the
SKIP
or button according to the desired
direction.
Each press skips one track
. During play, the first press on
the skip backwards button to the beginning of the current track.
• Playback resumes from the selected track.
TO SEARCH THROUGH TRACKS
•
Keep either one of the SKIP
or
button pressed
, according to
the desired direction, and release at the desired point.
REPEAT PLAY -- in play modes
This function allows one track or all tracks on a disc to be played repeatedly.
TO REPEAT THE SAME TRACK
• Press the
REPEAT
button once during playback, the REPEAT ONE
" " indicator will blink.
TO REPEAT THE WHOLE DISC
• Press the
REPEAT
button a second time to repeat all tracks, the
REPEAT ALL " " indicator will light.
TO CANCEL REPEAT PLAY
• Press the
REPEAT
button until the REPEAT indicator is turned off.
Note
Repeat play can only be done when the unit is in the play mode.
13.
CD display
14.
BAND switch
15.
AC socket
16.
Battery compartment
Play " " indicator
Pause " " indicator
Repeat all " " indicator
Repeat one " " indicator
Track number
1.
Handle
2.
CD door
3.
STOP button
4.
PLAY / PAUSE
button
5.
FUNCTION switch
6.
VOLUME control
7.
PHONES jack
8.
Fixed antenna
9.
Tuning control
10.
SKIP
button
11.
REPEAT
button
12.
SKIP
button
To AC inlet
To wall AC outlet