Repeat Playback (Repeat One and Repeat All)
To repeat the same track, press
" PLAY MODE/STEREO "
button
during play until "
" appears in
the display window.
Select desired track to be played
repeatedly by pressing "
SKIP - /
TUNING
" or "
SKIP + / TUNING
".
To repeat the whole disc
Press "
PLAY MODE/STEREO
" button
during play until "
" appears
in the display window.
During playback, every time the
" PLAY MODE/STEREO "
button
is pressed, the mode will change to the next one as follows:
NORMAL play -> (
) Repeat One -> (
) Repeat
ALL -> INTRO -> SHUFF
Normal Play - Playing the Whole Disc
The CD is played once from beginning to end.
VARIOUS PLAYING MODES
1. Press "
BAND / TUNER ON
" button to turn on the
Radio
.
2. Press "
SKIP- / TUNING
" or "
SKIP+ / TUNING
" button to tune
into a station.
To Tune Faster
Hold down the "
SKIP- / TUNING
" or "
SKIP+/ TUNING
" button.
While the button is being held, the frequency will change faster.
To Search for a Station Quickly (AUTO Search)
Keep the "
SKIP - / TUNING
" or "
SKIP + / TUNING
" button
pressed until the tuner starts searching for a station. After tuning
into a station, the search stops.
To stop the Auto Search manually, press the "
SKIP - / TUNING
" or
LISTENING TO THE RADIO
"
SKIP + / TUNING
" button.
The Auto Search may not stop at stations with very weak signals.
To Turn Off the RADIO
Press " " button to turn off the
Radio
.
Presetting RADIO Station
You can tune into a stored station directly by entering the
preset number.
10 stations on AM band can be presetted.
20 stations on FM band can be presetted.
1. Press "
BAND/TUNER ON
" button to select AM or FM band to
listen to the
Radio
.
2. Press "
SKIP - / TUNING
" or "
SKIP + / TUNING
" button to tune
your desired station.
3. Press "
PROGRAM/MEMORY
" button till "
PGM
" flashes in the
display window.
4. Press "
PRESET UP
" or "
PRESET DOWN
" button to select the
desired number.
5. Press "
PROGRAM/MEMORY
" button to store the station.
6. Repeat steps 2 to 5 to preset other stations.
Tuning Into a Preset Station
Press the "
PRESET UP
" or "
PRESET DOWN
" button repeatedly
to select the desired preset station.
For Better Reception
Notes:
Repeat play, intro play can be performed during program.
PGM play cannot be set in SHUFF play mode.
The program is also erased when the disc compartment is
opened or the auto power off function turns the power off.
If the program mode is exited by means of the " " button, all the
programs would still remain in memory.
During the program play, the AMS operates in the programed
order. (AMS-auto music sensor).
Intro Play - Playing the First Ten Seconds of
All the Selections
1. Press
"
PLAY MODE/STEREO
"
button during play until "
INTRO
"
flashes in the display window.
2. Press "
" to begin the "
INTRO
"
play.
3. Press "
PLAY MODE/STEREO
"
button to cease the
INTRO
play and
continue playback in the
NORMAL
play mode.
INTRO play always starts from the
first track.
SHUFF (Shuffle) Play - Playing the Selections
in Random Order
1. Press "
PLAY MODE/STEREO
"
button during play until "
SHUFF
"
flashes in the display window.
2. Press "
" to begin the SHUFF
play.
To locate the beginning of the track
being played: press "
SKIP-/
TUNING
" .
To locate the next track: press "
SKIP+ /
TUNING
"
"
. However, you cannot
locate a previous track even if you
press "
SKIP - / TUNING
".
PGM (Program) Play - Playing the Selections
in the Desired Order
1. Press "
PROGRAM/MEMORY
"
button until "
PGM
"
flashes and
"
" appears in the display
window.
2. Press "
SKIP- / TUNING
" or
"
SKIP + / TUNING
" button to
select the desired selection.
3. Press "
PROGRAM/MEMORY
"
button to store this track in memory.
4. To add additional track(s), repeat
steps 2 and 3.
5. Press "
", "
PGM
" stops flashing
and play starts.
To Edit Program Play:
To check: Press "
PROGRAM / MEMORY
" button lightly during
programming before you press "
". Each time
"PROGRAM / MEMORY"
button is pressed, the
track number appears in the display window.
To change: When checking, press either "
SKIP - / TUNING
" or
"
SKIP + / TUNING
" button to alter the track number
for the program currently displayed. Press "
PROGRAM
/ MEMORY
"
button to register the newly selected track
into memory.
To delete: When open the CD door including that program will be
cancelled.
DIGITAL ANTI-SHOCK SYSTEM
The Digital Anti-Shock System incorporates a special electronic
circuit that prevents sound from skipping when the unit is subject
to shocks and vibration during play.
When the unit receives a physical shock which prevents the laser
pick-up from " reading " the CD, this system immediately starts
playing the sound stored in its memory and continues until the laser
pick-up recovers.
If the unit is subject to continuous shocks and all the data stored in
memory is used up the sound will skip.
If the vibration stops then the data memory will be restored. To
reset the CD player, press " " once.
Note:
Under some conditions, noise may be heard or sound skipping
may occur.
-when the disc is dirty or scratched.
-when the disc contains certain signals.
TROUBLESHOOTING GUIDE
Should any problem persist after you have made the following
checks, consult your nearest service facility.
Disc play does not start:
The disc is inserted upside down or incorrectly. Insert the disc
correctly with the label surface up Dusty or defective disc Dirty
or dusty lens The disc compartment lid is not closed Moisture
condensation -> Leave the unit in a warm place until the moisture
evaporates The AC power adaptor is not plugged into the wall
outlet The unit is not placed on a level surface Weak batteries
No sound from the headsets:
The headphones/earphones plug is not firmly connected to the
PHONES jack Adjust the VOL control Dirty plug
Skipping of sound:
Dirty or defective disc Dirty lens Strong vibration
When using with batteries the battery life is short:
Power requirements
2 "AA" size (LR6 or UM-3) alkaline
batteries, or DC IN 6V, 350mA
power adaptor
Polarity of plug
Operating voltage:
U.S.A., Canada: 120V AC ± 5%
(AC adaptor) 60 Hz
Middle East and Australia:
240V AC ± 5% 50 Hz
UK and Germany:
230V AC ± 5% 50 Hz
Chile: 230V AC ± 5% 50 Hz
Singapore,Malaysia & Thailand:
200-240V AC ± 5% 50 Hz
Japan: 100V AC ± 5% 50/60Hz
Use alkaline batteries and not manganese batteries.
The unit can not be operated:
No disc , dirty disc or scratched disc. The unit will return to full
stop mode after approx.30 seconds, or reset the player by
pressing " " once and then insert a disc to start playing.
Design and specifications are subject to change without
notice.
Note:
During listen to the radio, you can press "
PLAY MODE/STEREO
"
button to select stereo broadcast. While the reception is good,
the
"
"
icon will appear in the display window.
FM
: To improve FM reception,
extend the earphone cord.
During Playback
The track number of the current selection appears.
When " " is pressed during playback, total number of tracks on
the disc will be displayed and the unit is in standby mode. If " " is
pressed again the unit will return to full stop mode. If "
" is
pressed the unit returns to play mode. The unit will return to full stop
mode automatically after approximately 30 seconds if no button is
pressed.
During Pause
The current track time flashes.
When no disc is inserted into the player and when "
" is pressed,
the display window shows "
" and " ".
The unit cannot be operated when " no disc " message is displayed.
After approx.30 seconds the unit will return to full stop mode, or
reset the player by pressing " " once and then insert a disc to
start playing.
1. Open the CD door by sliding the "
OPEN
" button.
2. Insert the CD with the printed side facing upwards and push the
disc gently until it clicks so that the disc fits into the pivot.
3. Press the CD door to close.
4. Press the "
" button to play "
CD
".
Note:
To play an 8 cm (3-inch) disc, you can play it without an
adaptor.
On Display Window
When you press "
", the display window shows:
DISC PLAYING
AM
: To improve AM reception,
rotate the unit.
Printed in CHINA
811-821691-040
Cleaning the unit
Do not use volatile chemicals on this unit. Clean by lightly
wiping with a soft cloth.
Cleaning CD
If the CD skips or will not play, the disc may need to be cleaned.
Before playing, wipe the disc in a circular motion from the
centre out with a cleaning cloth. After playing, store the disc in its
case.
Handling the disc
Only touch the CD on the edge to avoid finger prints on its
surface. Do not stick paper or tape, or write anything on the
surface.
MAINTENANCE
SPECIFICATIONS
Pause mode of the first track
