background image

11

10

Press I<< lightly and repeatedly.

Press >>I lightly and repeatedly.

Locating a Particular Point in a track

Keep I<< depressed

Keep >>I depressed

Low level audio will be heard during the search process to assist in locating the
correct point in the track.

Locating a Particular track

MAINTENANCE

Cleaning the Case
Wipe with a soft cloth. If the case is very dirty, dampen the cloth with a weak
solution of neutral detergent and water, and then wipe clean.

Cleaning the Lens
A dirty lens will cause sound skipping and, if the lens is very dirty, the CD may not
work. Open the disc cover and clean the lens as described below.
• Dust or Dry Particles
Using a camera lens brush/blower, blow on the lens couple times, then wipe it
lightly with the brush to remove dust. Then, blow on the lens once more.
• Fingerprints
If the lens cannot be cleaned by using a brush/blower, use a dry cotton swab
starting in the middle and working to the outside edge.

To  go back to the beginning of the
current or a previous track.

To go to the beginning of following
tracks

To search backwards within a track at
high speed.

To search forward within a track at high
speed

RANDOM PLAY

Enables all the tracks on a disc to be played in a Random (Shuffle) sequence.

1. Press MODE button four times, then RND is displayed.

2. Press PLAY/PAUSE button, then the track No. is selected

at random and starts play.

3. To select RANDOM mode during play, press the MODE

button until RND starts to flash.

• Press PLAY/PAUSE button or I<< or >>I, and begin

RANDOM play.

SKIP AND SEARCH FUNCTION

Summary of Contents for CE1000X








Reviews: