Chapter 2 - Page 23
BASIC FUNCTIONS
BASIC FUNCTIONS
DURING CALL MENU
1 : MUTE
2 : SILENT
3 : SEND MY PHONE #
4 : MY PROFILE
5 : VOICE PRIVACY
6 : LOCATION
STANDBY MENU
PAUSE INPUT:
1 : PREFIX
2 : HARD PAUSE
3 : TIME HYPHEN
PAUSE FEATURE
Pauses are used for automated systems (i.e., voice mail
and calling cards). Insert a pause after a phone number,
then enter another group of numbers. The second set of
numbers is dialed automatically after the pause. This
feature is useful for dialing into systems that require a
code.
1. Enter the phone number, then press .
2. Select desired pause. "P" or "T" will appear after the
number to represent the pause.
3. To dial, press
. To store, press
.
HARD PAUSE: If you enter the pause character (P), the
number entered after the pause character
will be sent after the number dialed.
TIME PAUSE: If you enter the pause character (T), the
number entered after the pause character
will be sent after 2sec/unit.
STO
FIND
PSE
Page 22 - Chapter 2
The phone resets to Speakerphone Off when it turns off
and back on.
SPEAKERPHONE
1. To activate the speakerphone in idle, answering or
calling mode, press and hold
.
2. After you have ended your call, speakerphone mode
turns off.
ANSWERING CALLS
1. To answer a call, press any key except , or .
2. To end the call, press .
NOTE:
Calls can be automatically answered by activating
the “ANSWER MODE” function. (Refer to page 82)
NOTE:
• The Caller ID numbers are saved in the call log.
Caller ID is a system dependent feature.
Please contact your service provider for details.
(Refer to page 30)
• Calling name(CNAP) is not stored in recent
call and in phonebook.
If the call is received with Secret :
1. The name will not be displayed and ringer will be a basic one.
2. The call will make after inputting password on phonebook.
CALLER ID
Identifies caller by displaying that person’s phone num-
ber. If the caller’s name and number are stored in your
phonebook, the name and number from the memory
location are displayed.
