- 7 -
LISTENING TO THE RADIO
Presetting Stations
The unit can store a total of 20 stations in memory (10FM, 10AM). Presetting allows you to tune in to
a station directly.
1. Tune in to a desired station.
2. Press the PROG/MEM/
button. The preset number will blink and the “MEM” indicator will be shown
on the display.
3. Press the MEM.UP/
button to select the preset number.
4. Press the PROG/MEM/
button again to store it in memory.
5. Repeat steps 1-4 to store other stations.
Tuning in to a Preset Station
Press the BAND/ STOP button to select AM or FM then press the MEM.UP/
button to select a preset
number.
For Better Reception
FM: Fully unwind the antenna wire. Extend the antenna wire and place it in the position that sounds best.
Note: Do not connect the FM antenna to an outside antenna.
AM: Reposition the unit to get better AM reception.
Notes:
• When the reception is good, the “
STEREO
” indicator will appear on the display.
• To prevent interference to the AM signal, please keep the AC adapter 3.17 feet (1 meter) away from the
main unit.
To Pause Playback
•
Press the
PLAY/PAUSE button.
•
To resume playback, press the
PLAY/PAUSE button again.
To Stop Playback
•
Press the BAND/ STOP button.
Skipping to Another Track
•
Press either the
or
button according to the desired direction.
Press the
button to skip to the start of the current track or skip to previous tracks. Press the
button
to skip to the beginning of the next track.
Locating a Particular Point on a Track
•
Keep either the
or
button pressed during playback, according to the desired direction, and release
at the desired point.
CD PLAYBACK
1. Press the STANDBY/ON button to turn on the unit.
2. Hold the OPEN knob up to open the CD door. Place a disc in the center
with the label side up and then close the CD door gently.
3. Press the FUNCTION button to CD mode. “
” appears and “- -” blinks
on the display. Then the total track no. is shown on the display.
4. Press the
PLAY/PAUSE button to start playing.
•
Adjust the volume levels.
A
C
B
