Audiovox AX-510 Owner'S Manual Download Page 9

128-7000

9 OF 10

and holding the programmed button on the transmitter for four seconds, or by

pressing and releasing the programmed button on the transmitter two times in

succession.  Check with your installation center for more information on what

accessories were installed and how they are accessed.

ADDITIONAL REMOTE FUNCTION ( CHANNEL 4 )

This security system has an additional feature that can be connected to a number

of different optional accessories. Some of the more common uses for this channel

are:

†

 Remote Trunk Release

†

 Remote Car Starter

†

 Remote Window Closure

†

 Remote Garage Door Interface

To activate the optional accessory, press the programmed button on the keychain

transmitter for up to 8 seconds for continuous output, or press and release for

momentary activation. The optional accessory will immediately engage.  Check

with your installation center for more information on the optional accessory that

may have been installed and how it is accessed.

ADDITIONAL REMOTE FUNCTION ( CHANNEL 5 )

This security system has an additional feature that can be connected to a number

of different optional accessories. Some of the more common uses for this channel

are;

†

 Remote Trunk Release

†

 Remote Car Starter

†

 Remote Window Closure

†

 Remote Garage Door Interface

To activate the optional accessory, press the programmed button on the keychain

transmitter for up to 8 seconds for continuous output, or press and release for

momentary activation. The optional accessory will immediately engage.  Check

with your installation center for more information on the optional accessory that

may have been installed and how it is accessed.

IGNITION CONTROLLED LOCK UNLOCK:

 (Unlock Drivers Only, or Unlock All Doors)

Your security system has a selectable safety feature that allows the vehicle doors

to lock when the ignition switch is turned on, (Providing all doors are closed), and

to unlock the doors when the ignition switch is turned off.  In addition, the unlocking

of the doors is further selectable,  in a two step unlock configuration, to unlock only

the drivers door or all doors.

TELEMATIC UPGRADE:

This system has the ability to have a telematic upgrade module connected to it.

This is a upgrade that can give you control of certain functions of your vehicle from

a Telephone, or in some cases a computer  interface.  Please check with your

installation center for most recent Telematic Upgrades.  If you had a Telematic

Upgrade installed, the manual supplied with the upgrade unit will provide a op-

erators manual advising of the features of the system and means available to

control these features of your vehicle.

Summary of Contents for AX-510











Reviews: