SETUP
(Continued)
Positioning the Speakers & Subwoofer
Setting the Input Mode and Listening Channels
Remarks:
1. "O" The speaker is active." X " The speaker is inactive.
2. Generally, only Front Left, Right speakers and Subwoofer are active in TUNER mode.
3. 3 STEREO mode creates a surround sound effect without using the rear speakers. In this mode, no sound
comes from the rear speakers.
AV1: Turn on the unit and “AV1” will automatically show on the display, press AV1 button again until “AV1
ANALOG” appears on the display.
AV2: Turn on the unit and press AV2 button to select the AV2 input mode, press the button again until “AV2
ANALOG” appears on the display.
AV3: The AV3 audio input is analog only.
Notes:
• AV1 and AV2 input mode can auto-detect the input source(digital or analog) and auto-switch to the
corresponding mode.
• To enter “force analog” mode, press AV1 or AV2 button again until “AV1 ANALOG” or “AV2 ANALOG” appears
on the display. “Force analog” mode is available for AV1 and AV2 only.
• You can press the SURROUND button repeatedly on the remote control to change the sound output status.
Please see the table below.
The following table shows which speakers are working in various modes.
5
SUBWOOFER
Can be placed anywhere.
REAR SPEAKERS
Place right beside or slightly
behind your listening position,
and a little higher than your ears.
CENTER
Place on the top of or below the TV.
FRONT SPEAKERS
Place on both sides of the TV,
equal distances apart.
