TRANSMITTER PROGRAMMING GUIDE
Model : APS 95 BT3S
The transmitters included with the security system have been pre - programmed
at the factory, with each button pre - assigned to control a specific function of
the security system. Although the security system in the vehicle has either 3
or 4 channels ( RECEIVER ) depending on the model, the transmitters included
with the system are 7 channel transmitters. This allows you to program each
transmitter to more than one vehicle in two car families, and also allows you to
change which button ( s ) control certain functions of the system. ( Example:
Transmitter channel 5 can be programmed to activate Receiver channel 2. )
Refer to the chart below for access to each of the transmitter channels, and
for the standard factory button assignments.
TRANSMITTER
SYSTEM RECEIVER
CHANNEL
BUTTONS
CHANNEL
FUNCTION
1
1
1
Remote Arm & Disarm
Remote Emergency Panic
Remote Door Lock & Unlock
2
2
2
* Pulsed Output for Accessories
3
3
3
* Switched Output for Accessories
4
2 & 3
4
* Switched Output for Accessories
5
1 & 2
-
-
6
1 & 3
-
-
7
1, 2, 3
-
-
* Some of the more common accessories for these additional channels are;
AS 9151N
Remote car starter
AS 9153
Remote window roll up
AS 9256
Remote trunk release relay
