7
7
7
7
7
1. Turn the radio on and select the desired band.
2. Select the first station to be pre-set using the
Manual Up/Down or Automatic Seek Tuning
Controls
bm
.
3. Press the pre-set button ("1-6") to be set and
continue to hold it in. After approximately 2
seconds, the pre-set number will appear on the
display panel, indicating that the station is now
set into that pre-set memory position. The station
can now be recalled at any time by pressing
that button.
4. Repeat the above procedure for the remain in
pre-sets on that band and for the other 4 bands
on the unit.
bp
LIQUID CRYSTAL DISPLAY PANEL
FUNCTIONS
The Liquid Crystal Display (LCD) panel displays the
frequency, time, and all activated functions, including
five bar graphs which provide a visual representa-
tion of the volume level and the left and right channel
balance levels. The volume level is represented by
three thin bar graphs. As the volume is increased,
the number of illuminated segments will increase.
The left and right channels are represented by the
wider bar graphs. As the strength of the signal
applied to either the left or right channel increases,
the number of illuminated segments will increase.
NOTE: It is a characteristic of LCD panels that, if
subjected to cold temperatures for an
extended period of time, they may take longer
to illuminate than under normal conditions. In
addition, the visibility of the numbers on the
LCD may slightly decrease. The LCD
read-out will return to normal when the
temperature increases to a normal range.
bq
DISC SLOT
With the label surface facing up, gently insert the
disc into the slot until the soft-loading mechanism
engages and disc play begins. The
indication
illuminates and becomes animated, the
IN sym-
bol lights, and the track number and elapsed time will
appear on the display panel.
CAUTION: This unit is designed for play of
standard 5" (12cm) Compact Discs
ONLY. Do not attempt to use 3" (8cm)
CD-Singles in this unit, either with or
without an adapter, as damage to the
player and/or disc can occur. Such
damage will not be covered by the
Warranty on this product.
br
TRACK SELECT
These buttons are used to quickly select the beginning
of a particular track. With each momentary tap of
the Forward Track Select button (
), the next higher
track number will be selected as shown on the
display panel. Similarly, with each momentary tap
of the Backward Track Select button (
), the
next lower track number will be selected.
bs
CUE/REVIEW FUNCTIONS
High-speed audible search to any section of the
disc can be made by the Cue and Review functions.
Press and hold the Cue button (
) to advance
rapidly in the forward direction or the Review button
(
) to advance rapidly in the backward direction.
During either function, the elapsed time within each
track will automatically be shown on the display panel.
bt
CD TRACK ONE POSITION (TOP) SELECTOR
During disc play, press this button to return to
beginning of first track on disc. Disc counter will
return to zero and TRACK number 01 will appear
on display panel.
bu
REPEAT PLAY SELECTOR (RPT)
During disc play, press this button to repeat the play
of the selected track (RPT will appear on the display
panel). Play of the track will continue to repeat until
the button is pressed again and the RPT indication
disappears from the display panel. Repeat Play mode
will also be cancelled by activating the Random Play
cl
or Track Scan
cm
functions.
cl
RANDOM PLAY SELECTOR (RDM)
During disc play, press this button to play the tracks
on the disc in a random or shuffled order (RDM will
appear on the display panel). In Random Play mode,
pressing the Forward Track Select (
) will also
select tracks in a random order instead of the normal
progression. The first press of the Backward Track
Select (
) will go back to the beginning of the track
in play. Additional presses will select tracks in random
order. The Random Play mode can be cancelled
by pressing the button again (RDM) indication will
disappear from the display panel) or by activating
the Repeat Play
bu
or Track Scan
cm
functions.
cm
TRACK SCAN (SCN)
During disc play, press this button to play the first
10 seconds of each track on the disc (SCN will
appear on the display panel). When a desired track
is reached, press the Scan button again to cancel
7
7
7
7
7
OPEROPEROPEROPEROPER
AAAAA
TTTTT
ING INSTRUCING INSTRUCING INSTRUCING INSTRUCING INSTRUC
TTTTT
IONSIONSIONSIONSIONS
