BUTTON 1
BUTTON 2
TRANSMITTER PROGRAMMING
GUIDE Model : AA99BT2
The transmitters included with the system have been pre-programmed
at the factory, with each button pre-assigned to control a specific function
of the system. Although the system in the vehicle has a 2 channel
RECEIVER, the transmitters included with the system are capable of
transmitting 3 distinct codes. This allows you to program each transmitter
to more than one vehicle in two car family. Refer to the chart below for
access to each of the transmitter channels, and for the standard factory
button assignments.
TRANSMITTER
SYSTEM RECEIVER
CHANNEL BUTTONS CHANNEL
FUNCTION
1
1
1
* Remote Door Lock & Unlock
Push And Hold 3 Seconds
For Car Finder
2
2
2
Push 2 Times To Start/Stop
* Remote Emergency Panic is available only on certain models.
* Door Lock/Unlock may require additional components in certain
vehicles.
** Some of the more common accessories for these additional channels
are;
AS 9153
Remote window roll up
AS 9256
Remote trunk release relay
Summary of Contents for AA-99BT2
Page 4: ...128 5865...
