128-6996A
8 of 28
Brown Wire:
(+)
Siren Output
This is the positive siren feed wire. Route this wire through a grommet in the firewall to the siren location.
Connect the Brown wire to the Red wire of the Siren. Secure the Black wire of the Siren to a known
chassis ground or solid clean metal surface.
Siren Wiring Detail
8
Parking Light Wiring Detail
Purple Wire:
(+) Door Trigger Input
If the vehicle's door courtesy light sw 12 volts when the door is opened, (Some Fords and some
Imports), you must connect this wire to the positive output from one of the vehicle's door pin switches. In
most cases, the Purple wire will need to be connected to only one door switch no matter how many doors
the vehicle has as most door lighting circuits are wired in parallel. This wire will be shunted when remote
starting the vehicle and will remain shunted, if active, while running under command of the remote start. If
this wire is active when the system is armed, the siren will emit three chirps. When the zone clears, the
siren will emit 1 chirp to confirm full arming. See below for wiring details.
Note for vehicles with interior delay lighting see programming under title "Completing The Installation".
Positive Door Switch Wiring Detail