9
AM/FM CHANNEL SELECTOR
(BAND)
Each time this button is pressed, the radio
band is changed. The indication AM1, AM2,
FM1, FM2 or FM3 will appear on the display
panel according to your selection.
bl
TUNE/SKIP/TRACK ( / )
BUTTONS
To manually select a radio station,
momematrily press the Up Tuning ( )
button to advance the unit higher, or the
Down Tuning ( ) button to tune lower
within the selected band.
Pressing either button for longer than 0.5
second and then releasing will activate the
Automatic Skip Tuning function. The radio
will skip over weaker stations in the selected
direction and stop at the strongest frequency.
The Seek function can be stopped by
pressing the button again or by activating any
other tuning function.
bm
FM MONO/STEREO BUTTON (MONO)
During FM radio operation, this button is used
to select mono or stereo reception of the
broadcast signal. Under normal reception
conditions, the unit should be left in the
stereo mode as indicated by the ST
indication on the display panel when tuned
to an FM stereo signal. If the stereo signal
is too noisy for comfortable listening, press
the FM Mono/Stereo Selector button to
switch to mono reception (the ST
indication will disappear from the display
panel). To return to stereo reception mode,
press the button again so that the ST
indication appears in the display panel.
bn
PRE-SET SCAN (PS)
AUTO-STORE TUNING (AS)
Press this button momentarily to scan the
stations pre-set into the six memories of the
current band in use. The unit will stop at each
pre-set station for 5 seconds before
continuing to the next pre-set station (the
pre-set number on the display panel will flash
during Pre-Set Scan operation). Press the
button again momentarily to stop Pre-Set
Scan operation and remain on the selected
frequency. If no buttons are pressed during
the scan, the unit will return to the original
station before the scan started.
Pressing and holding the button for longer
than 2 seconds will activate the Auto-Store
Tuning feature which will automatically scan
and enter up to 6 stations into the pre-set
memories on the band in use. If you have
already set the pre-set memories to your
favorite stations, activating the Auto-Store
Tuning feature will erase those stations and
enter the new ones. This feature is most
useful when traveling in a new area where
you are not familiar with the local stations.
bo
STATION PRE-SET MEMORIES
To set any of the 6 pre-set memories in each
band, use the following procedure:
1. Turn the radio on and select the desired
band.
2. Select the first station to be pre-set
using the Manual TUNE or Automatic
SEEK Controls
bl
.
3. Press the pre-set button to be set and
continue to hold it in for
approximately 2 seconds. The
preset number, followed by CH
(channel) will appear on the display
7
7
7
7
7
OPEROPEROPEROPEROPER
AAAAA
TTTTT
ING INSTRUCING INSTRUCING INSTRUCING INSTRUCING INSTRUC
TTTTT
IONSIONSIONSIONSIONS
+
-
+
-
