background image

128-6210A

6 of 12

USING THE UP/DOWN BUTTONS
To select an XM® channel using just the Up/Down directional buttons,
proceed as follows:

1.

Momentarily press the Up direction (        ) button to advance,
one step at a time, to the next higher channel.
To advance rapidly in the upward direction, press and hold the
Up direction button until the desired channel is reached; then
release the button.

2.

Conversely, momentarily press the Down direction (         ) button
to advance, one step at a time, to the next lower channel.
To advance rapidly in the downward direction, press and hold
the Down direction button until the desired channel is reached;
then release the button.

SELECTING CHANNEL CATEGORIES
To select a specific group or category of entertainment, proceed as
follows:

1.

Press the Shift (SFT) button; the first channel number in that
category (CH 020 in the “Hits” category, for example) flashes for
5 seconds.

2.

While the number is flashing, momentarily press the Up
directional (        ) button.

3.

The category will advance to the next higher category (for
 example, 040 in the “Rock” category), which will also flash for 5
seconds. If no further advance is made, the category will then
remain steady.

4.

To select a category in the down direction, repeat step 1
and momentarily press the Down directional (        ) button. This
will advance to the next lower category.

NOTE: Each category or group is assigned a sequential block of chan-
nels. To navigate within a category, enter Shift (SFT0981 Shift (SFT).
When in this mode, switching between different channels within a
category, the tuning will automatically wrap around from the last to the
first channel in that category or vice-versa. When a new category is
chosen, the radio will automatically select the first channel in that cat-
egory.

6

DISPLAYING THE IDENTIFICATION (ID) CODE
Before you listen to XM® Radio, you must subscribe to the service. To
do so, your tuner ID code must be used to identify your radio. This code
not only allows you to subscribe to XM® Radio, but also allows you to
report any problems. To display the radio ID, proceed as follows:

1.

Use the Up/Down buttons to access channel 000; note that the
ID for your radio is displayed in the following format:

MOMENTARY PRESS:
ADVANCE UPWARD ONE
CHANNEL AT A TIME

PRESS AND HOLD:
CONTINUOUS ADVANCE
UPWARD

MOMENTARY PRESS:
ADVANCE DOWNWARD
ONE CHANNEL AT A
TIME

PRESS AND HOLD:
CONTINUOUS ADVANCE
DOWNWARD

2.

Make a note of your radio ID;
then contact XM® Radio through
the web, or by phone, to sub-
scribe to the service.

NOTE:

When an invalid (no broadcast) channel is encoun-
tered, the channel is automatically skipped.

SFT

0

4

7

1

5

8

2

6

9

3

    XM  Radio

    

RADIO ID

    YRW600HQ

-----------------------

CH 000               RADIO ID

SFT

0

4

7

1

5

8

2

6

9

3

AUDIO   OX

20 on 20

The Techs

Oh Baby Oh Baby

---------------------------------

CH 020

   

     Hits  

SFT

0

4

7

1

5

8

2

6

9

3

AUDIO   OX

20 on 20

The Techs

Oh Baby Oh Baby

---------------------------------

CH 020

   

     Hits  

PRESS
SHIFT

CATEGORY/GROUP
NUMBER FLASHES

PRESS UP BUTTON TO
ADVANCE TO NEXT
HIGHER CATEGORY

PRESS DOWN BUTTON
TO ADVANCE TO NEXT
LOWER CATEGORY

CATEGORY/GENRE

Summary of Contents for 128-6210A













Reviews: